Large Output Low Noise Automatic Operating Motor Stator Separator
TF-008 motor recycling equipment is a heavy duty with large torque
recycling machine.mainly used in waste scrap copper motor stator
recycling.it can taking out all the copper windding .liberate your
Working process of motor separator machine:
Mainly have 2 area: cutting and separating complete the whole
process.Firstly the cutting parts cut the motor shell by flat blade
then the sharp blade cutting the motor stator into 2pcs.Secondly
taking out all the copper winding in twice by putting area.
Advantages of motor recycling machine:
1. This stator separator is targeted with high efficiency, after
cut the stator in half, it can take out all the copper winding
within 2 times, which is high economic efficiency.
2. Nice appearance with reasonable structure.
3. Using heavy cylinder, large torque, can withstand high loads.
4. We use international famous brand for hydraulic solenoid valve
with durable long life.
5. The material of fixture is alloy steel with durable long life.
6. The processing of equipment is without metal loss, with improved
recycling value, and environmental friendly.
Specification of stator recycling machine:
|Product Name||Motor Stator Recycling Machine|
|Usage||Cutting and Pulling Out The Copper From Stator|
|Stator Range||8~30cm Stator Diameter|
Q1: Is there anything we should take care before processing?
A1: Please clear up iron from the mixed cables, get the granulator
started, infeed according to the granulator’s capacity.
Q2: If there’s plastic in copper granules,how should I do?
A2: Please adjust the wind power of the vibrator, bottom wind
power, adjust vibration frequency.
Q3: If copper granules output quantity is becoming Less,what’s the
A3: Please inspect the vibrator, please brush off the copper
granules in the vibrator’s screen.
Q4: Which kinds of cables can I processing with this machine?
A4: Auto-wire, communicate cable, and other mixed copper
wire/cable, phone wires and so on.
Q5: Is there has pollution in recycling?
A5: This is dry separating, not pollution and other waste at all.