Full Automatic Enameled/Motor/Industrial Copper Wire Granulator
TF-600(capacity:300-320kg/h)copper cable granulator machine has
high recycling efficiency and high purity. Mixed crushed
material(copper pellet and plastic pellet)enter vibrating separator
together with airflow,and finally the pellet are put on the small
vibrator(second separator)to get 100% purity.
Copper Wire Granulator Application(raw materials):
Applicable cables: Waste communication copper cables, motor cable,
car cable, industrial cable,household cable, enamelled cable.
Applicable cable diameter: 0.3-20mm
Copper Cable Shredding Machine Description:
1. Crushing System: Crushing is the first step of whole recycling
process of the granulator machine.There is 14pieces of moving
blades inside the crusher, and it can cut small pieces of scrap
copper wires to small pellet with size of 5-8mm(depends on raw
2. Screen:The screen is inside vibrating separator, which help to
separate copper pellet and other mixed materials. There are
different size of the holes on it, customer can choose proper size
according to size of raw material.
3. Blades: There are 12pieces moving blades inside.
4. Output copper pellet: Copper pellet out of vibrator will enter
second small vibrator for second separating. With our granulator
machine, customer can get almost 100%purity copper pellet.
5. Output plastic pellet: Plastic pellet will also get second
separating with small vibrator to get high purity.
6. Small vibrator: There are two small vibrators matched with the
machine(for copper and plastic) for second separating.
Scrap Metal Recycling Equipment Specifications:
|Model||Recycling capacity||Processed wire dia.||Total power||Voltage||Dimension||Weight|
Copper Recycling Machine Working Principle:
1. Put wires and cables into the crusher, in which they are crushed
and plastic sheath and copper separated completely. The length of
the crushed material is based on the mesh of the riddle: the bigger
the mesh is the longer the crushed material will be and the larger
the output will be. The mesh should be chosen in production
according to the type of the material.
2. The crushed material (mixture of copper granules and plastic
pieces) is conveyed to the separator by the conveyor, during which
procedure dust and part of plastic pieces of light weight(including
fiber, rope, or tapes, etc. mixed in the wires) are collected by
the pressure-reducing blower. The above opening of the pressure
reducing blower is connected with the dust collector opening in
which a dust collecting bag is used to prevent discharge of dust
for the purpose of environmental protection. Dust and part of
plastic pieces of light weight are collected in this bag and will
be discharged when the bag is full.
3. The cable separator is used for separating plastic pieces and
copper granules. According to the differences of the physical
properties and specific gravity between different materials, there
is specific gravity deviation under the forces of Aerodynamic and
Vibration friction. By adjusting the speed of material conveying
and amplitude parameters, copper granules (of larger specific
gravity) will move to the riddle bottom and move from down to up,
and plastic pieces (of smaller specific gravity) will move to the
above of copper granules and move from up to down, and in the end
they will both be discharged through different openings.
4. All the units are installed on the underbed to form a whole
structure. The machine is adjusted ready for production before
shipping, and the customer only need to connect it to the power